Remove Oil Stains from Concrete

Clean oil, grease and dirt from practically anything: concrete, asphalt, engines, tools…even dirty clothes or carpets and floor mats. It’s best to remove oil stains from concrete as soon as they happen, and this biodegradable cleaner is just the thing to do just that and more.

Eco-friendly, water-based, and with a fresh scent, this degreaser is also non-corrosive and non-toxic.

It’s important to have clean concrete if you’re going to stripe, treat, or cure the surface. Any grease or oil within the concrete can harm or damage it, so it’s best to remove any spills as they happen. The process is simple!

Directions to Remove Oil Stains:

1. Spray the stained concrete with water.
2. Pour the degreaser directly onto the stain.
3. Scrub the degreaser into the stain with a synthetic bristle brush, working from the outer edge towards the middle of the stain. If removing a particularly large stain, use a push broom. Beware: surface may be slippery at this point!
4. Let the stain soak in the degreaser for 5 minutes. If the solution begins to dry before the 5 minutes are up, spray with some more water.
5. Rinse the entire area with a strong stream of water and let dry.

For saturated or old stains, repeat the cleaning process after letting the concrete dry for at least 24 hours from the previous cleaning.

This ultra-concentrated 5-gallon pail leaves no surface residue and leaves your surface slip-free when it’s done. Able to remove dirt as well from uncoated concrete floors, this cleaner stops dirt tracking and leaves your concrete looking like new.

Download the Material Data Safety Sheet for this Degreaser for Asphalt Stain Removal

Dimensions: 13 W x 12.2″ D x 14.7″ H
Weight: 45.87 lbs